DODGE EF4B-IP-308LE Flange Block Bearings

D:20 mm; Mass bushing:0.026 kg; Coefficient of friction µ min.:0.05; Tolerance housing:H7; B:30 mm; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; d:15 mm;

D:225 mm; Mass bearing:5.25 kg; r0:1 mm; Calculation factor A:0.304; D1 ≈:200 mm; Da max.:213 mm; Calculation factor Y2:1.07; d1 ≈:175 mm; Calculation factor X:0.6; Calculation factor e:0.95;

Specific static load factor K0:45 N/mm²; h:46 mm; Tolerance shaft:e7; a:3 mm; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.31 kg; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; α:124 °; B:45 mm;

Basic dynamic load rating C:1.99 kN; D2 ≈:19.03 mm; d2 ≈:10.5 mm; r1,2 min.:0.3 mm; Reference speed:75000 r/min; Basic static load rating C0:0.78 kN; B:7 mm; d:6 mm; Calculation factor kr:0.035; Da max.:20 mm;

B2 ≈:475 mm; Calculation factor Y2:3.9; Mass bearing + sleeve:1850 kg; Calculation factor Y0:2.5; Limiting speed:340 r/min; r1,2 min.:7.5 mm; d1:850 mm; Fatigue load limit Pu:2040 kN; ra max.:6 mm; Calculation factor e:0.26;

J max.:295.275 mm; Ca:62.23 mm; R1:60.325 mm; End plug (suffix Y):EPR 11; Initial grease fill:141.75 g; Pa:14.1 kN; Labyrinth ring:2 x LOR 186; Bearing limiting speed:3800 r/min; R2:27.781 mm; J min.:263.525 mm;

ba:46.831 mm; RG:3/8 NPT; H2:44.45 mm; H1:114.3 mm; Mass pillow block:28.6 kg; Bearing:23024 CCK/W33; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 14; H:217.488 mm; A2:155.575 mm;

Da:269.999 mm; P180°:96.1 kN; h:50.8 mm; Labyrinth ring (dc shaft position):LOR 134; ba:77.787 mm; Lock nut:AN 30; db:168.275 mm; P90°:138 kN; Cap bolt recommended tightening torque:359.3 N·m; Eye bolt:2 x 3/8-16 UNC;

Shaft Diameter D:1 3/16 in; Dimension H:1.1563 in; Dimension C:3.5000 in; Insert Bearing IB:Stainless Steel; Dimension S1:0.8750 in; Dimension L:4.3750 in; Dimension D2:2.7500 in; Weight W:1.40 lb; Dimension G:0.3750 in; Dimension J:1.6250 in;

E:143 mm; D:160 mm; b1:15 mm; F:107 mm; rs (min):2 mm; Dynamic (Ca):147 kN; d2 (max):115.3 mm; s:2 mm; r1s (min):2 mm; Static (Coa):158 kN;

da max.:43.1 mm; Da max.:57.4 mm; Calculation factor f2C:1.06; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y2:0.87; da min.:39.6 mm; r3,4 min.:0.6 mm; Number of balls z:17; Mass bearing:0.14 kg; Static axial stiffness, preload class C:171 N/µm;

B:25 mm; d:65 mm; r, r1,2 min.:1 mm; Mass inner ring:0.16 kg; F:73 mm;

h:80.963 mm; Eye bolt:2 x 1/2-13 UNC; J1:133.35 mm; N1:41.275 mm; Stabilizing ring:SR-44-38; A1:222.25 mm; Mass pillow block:284 kg; Cap bolt recommended tightening torque:400 N·m; J min.:628.65 mm; Cap bolt:4 x 1-8 UNC;

Reference speed:1800 r/min; B:93 mm; Basic static load rating C0:1320 kN; Basic dynamic load rating C:1176 kN; Calculation factor Y2:2.9; r1,2 min.:4 mm; da min.:147 mm; b:16.7 mm; Da max.:263 mm; D1 ≈:233 mm;

Grease Speed Rating Open/Shielded n1:5600 rpm; Oil Speed Rating Open/Shielded n2:6700 rpm; d:75.000 mm; Basic Static Radial Load Rating Co:35500 N; B:20.00 mm; D:115.0000 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:42300 N; Accessories:One Shield; Fillet Radius ra:1.00 mm